Would you like a short to medium snake plant that is resilient? We’ve got you covered by introducing you to the Sansevieria Whitney, another cultivar of the famous Trifasciata. The leaves are dark-green, sculptured, and spotted with white. It forms a compact rosette of 4 to 6 leaves. Native to Africa and Madagascar, this plant can tolerate different light levels, including shade and direct sun.
The thick succulent leaves also remain healthy without constant watering. Therefore, it makes an excellent choice for all types of users, including beginners, travelers, and busy folks. They can be grown both indoors and outdoors in pots and containers in moderate temperatures. Would you like to know more? Learn how to properly care for and propagate the Sansevieria trifasciata ‘Whitney’ plant by reading on.
Sansevieria Whitney Plant Features
Dimensions
- There are only leaves on this small Snake plant. The size of this plant has been recorded in different ways. According to most reports, this plant can grow up to a half meter or even a full meter.
- Typically, there are four or six leaves per rosette. The width is approximately six to eight inches as well.
- However, some people report them to be dwarf cultivars, growing no higher than 6 to 10 inches.
Toxicity
Plants such as this one should be kept away from children and pets. We and animals are at risk since it contains more calcium oxalate crystals. It is possible to suffer from issues like allergies, nausea, and dhiroha when handling or ingesting the product. Thus, you need to be vigilant and place Whitney Snake Plants in a safe place.
Air-purification
This cultivar is also well known for its air-purifying abilities, just like all other Sansevierias. Formaldehyde is removed from the air thanks to it, so it’s a healthier setting.
Sansevieria Whitney Care
These plants would not be wrongly referred to as hard to kill. Aside from overwatering and strong direct sun, this plant has no enemies. Keeping your Sansevieria healthy and happy is as simple as following the basic Sansevieria care guidelines.
Water Needs
Sansevieria resilience is proudly owned by this plant. Despite your minor neglects in watering the succulents, the thick leaves remain healthy.
Watering is based on the principle of soaking and drying the soil. The soil should be completely moistened, then allowed to dry out before being watered again. Depending on the temperature and weather, you need to water plants more or less often. In spring and summer, water the soil every week or every ten days. For colder days, once every fifteen to twenty days should suffice.
Overwatering is a serious problem for Sansevierias. Ultimately, fungus and root rot can kill plants if left unattended. Therefore, don’t water before the soil has dried out. Don’t let the plant completely dry out. The soil should be watered as soon as it becomes dry.
The second thing you should do is to water the soil rather than the leaves. The reason is that leaves remaining wet for an extended period can cause serious issues. A pest attack, fungus, or rotting are examples of these problems.
Lighting Requirements
The sun should be moderately bright and indirect. Despite this, they can tolerate a wide range of light levels, including shade. You should choose an area in your yard that is shady and has plenty of bright (indirect) light. An indoor plantery can be established on a tabletop in your home or office with a well-lit window.
Requirements for temperature
Ideally, they should be kept at a temperature of 45 to 85 °F. Our normal room temperature is this temperature.
Frost is not tolerated by these plants, as they love the warmth. For those living in colder climates, indoor cultivation is best. If growing outdoors, however, simply move them to a warm indoor location before the weather turns cold in fall.
Requirement for Humidity
You don’t need to worry much about humidity when you have Whitney Sansevieria. It is sufficient to keep the plant happy with an average moisture level of around 60%.
Requirements for Soil
Ideal soils and potting mixtures are well-draining and loose. Plants grow better in sandy soil or in potting mix that has a low level of peat. Additionally, you can use a common cactus potting mix/soil.
Fertilizer Requirements
Provide your houseplants with adequate nutrition by using a balanced houseplant fertilizer. During spring and summer, mild doses are recommended once a month. Almost half of the stated dose is the concentration experts always recommend. As a result, the plant does not become scorched out or even killed by over-fertilizing.The Sansevierias grow more slowly in cooler weather. Reduced nutritional needs result from this. Therefore, do not fertilize your plants from the end of the summer until the beginning of the spring.
Requirements for Pots
You should choose a medium-size pot based on the plant’s size. At the base, you should check for drainage holes.
Pruning Requirement
Plants like these don’t require frequent cutting. The damaged leaves can however be removed, which will be beneficial to your plant’s health.
Sansevieria Whitney Propagation
Are you thinking about making some new Whitey Rosettes? Just like other Sansevierias, this one is also an easy plant to grow. Propagating Sansevieria is common using a number of methods, including;
- Plant-division.
- Leaf-cuttings.
Plant-division
This method is used to obtain clones that are exact copies of the cultivars. Other methods of propagation give you plane green leaves, but this method gives you the exact pattern.
The Method is As Follows
Adding clumps or pups to Sansevierias expands the plant. Growing from the mother plant, these are baby plants. The pups can be separated from the plants and then replanted separately.It is important to have at least one pup produced by a well-drown plant. Grass should be removed from the base. Remove the root system now. Keep the roots in mind to avoid damaging them.Observe where the rhizomes of the mother plant and the clump are attached. The rhizome should be cut with a gardening knife that has been sterilized. Separate the pup from the lower roots by very gently pulling. Each pup/clump should be separated in the same manner. Plant each of them in its designated pot or place. To grow these plants, use a moist soil that drains quickly.
Initial Care
As with the parent plant, place them in indirect sunlight. Moreover, water the soil in a mild manner to prevent loosening it.Within two to three weeks, each baby plant will be established as an individual snake plant whitney.
Propagation by Leaf-cuttings:
Grass shears that have been sterilized may be used. About a 10-inch leaf should be cut. This can be further divided into about pieces.Each cutting needs to be planted in a moist sterile growing medium about an inch deep. Under the potting mixture, make sure the lower side of the leaf-cutting faces down. Reverse-planted cuttings won’t take root!Indirect light is best for this setup. Additionally, spray water once the soil has gotten about 90% dry to keep it moist.Rooting takes about four to six weeks for these cuttings. Make sure the cutting is growing by applying a little pressure on the head. There is a small rooting system visible on a resistant cutting. With the soil in the pot, you can replant them. This plantlet will be mildly watered for a few weeks until it receives the Whitney Care described previously.
Propagation in Water
Can Whitney Snake Plants be propagated in water? The answer is, Yes! Alternatively, you can dip the leaf-cuttings in water. Keep the water clean by changing it every week so fungal growths and muck don’t occur.Growing roots takes between four and six weeks. After that, you can simply plant them in the medium of your choice.