How To Hang Trimmer In Garage? 3 Superb Guides To Take Care Your String Trimmer Well

String Trimmer

How to hang trimmer in garage? Cutting grass, weeds, and groundcover is easy using the string trimmer, which is also known as a weed eater, weed whacker, weed wacker, weed whip, line trimmer, brush cutter, and the whipper snipper. It consists of an engine that drives the cutting line , two wheels , a handle, and a guard. The guard can be removed to allow access to the blade.

This allows one hand to hold the handle while the other holds the blade against the lawn at high speed. A single-wheel design has been marketed as a home garden trimmer but they are not suitable for use outside. They should only be used by professionals who know how to use them safely.

The term “trimmer” comes from the fact that this machine was originally designed to trim trees, shrubbery and hedges. In addition to its ability to remove vegetation, the trimmer’s sharp teeth may damage flowers, fruit plants and vegetables if not handled properly. Trimmers are most often used to cut turf, although they can be used to cut any type of ground cover including weeds, moss, sod and peat. In this blog, we also have an article about best string trimmers that you might want to see about it.

String trimmers (also called weed whackers or weed whips) create clean lines after mowing. Here’s how to find the best string trimmer for your lawn.”

Dan Stout, author from familyhandyman.com

History

Early versions of string trimmers were invented and sold by John Deere in 1884. Other manufacturers soon followed suit and today there are many different types produced worldwide. String trimmers have evolved since their original patenting into larger machines with more power, better performance, greater portability, longer working life, increased safety features, and enhanced performance.

String trimmer models range from the smallest handheld units capable of being held in one hand, through medium sized utility units that require two hands to operate, up to large commercial models which can take several people to operate effectively. Many modern string trimmers are powered directly from electric motors—the most common power source being AC induction motors . These motors do not run on batteries or gas; instead, electricity is sent through wires attached to the motor. Electric trimmers are used primarily because they are easier to transport than gasoline driven trimmers.


How To Hang Trimmer In Garage

When using an electric or gas-powered weed whacker, there are a few more guidelines to follow when storing your equipment.

Gas String Trimmer

We’ve already said that you should hang your weed-eater on the wall for safety and to keep your workplace organized. But it’s not just for show; it’s good form to have it there for a purpose. Gas-powered weed whackers use gasoline as their fuel source.

A weed eater has a carburetor, air filters, and an engine, therefore it is imperative that you do not leave it on its side, risking flooding or causing internal damage. Hanging the weed-eater near the engine will keep it safe and well-maintained, avoiding any potential engine problems.

String trimmers or weed eaters, weed wackers, weed trimmers, grass trimmers, or whatever else you choose to call them make it easy to cut grass and weeds in hard-to-reach or sensitive spots. Gas-powered models, though loud and bad for the environment, are really the only option if you need a high level of power coupled with high mobility.”

Jordan Ardoin, author from Lawnstarter.com

Electric String Trimmer

The main difference between storing an electric weed eater and a gas-powered one is that the former uses a battery while the latter relies on gasoline. To ensure the weed-eater is safe, remove the battery before storing it. If you leave the battery plugged in, it will degrade with time, just like any other electronic gadget that uses a battery.

Preparing to Store Your Weed Eater for the Colder Season

It’s a good idea to take a few extra precautions when it comes to storing your weed-eater for the winter. Here’s how to do it:

  • It would be a waste to leave any gasoline in your weed eater over the winter. If you want to save as much of the gas as possible, all you need do is empty the tank into a smaller can for storage, starting a bonfire, or whatever else you may need it for!
  • Next, the carburetor will need to be emptied of any remaining gas. If you want to get rid of this, all you have to do is start the engine and leave the weed eater going until the gas runs out.
  • Last but not least, sanitization and preservation.
  • To remove the filth that has accumulated during the summer, we suggest using a brake parts cleaning to get into all the nooks and crannies. If you don’t remove the plastic cover, you won’t enjoy the whole experience.

Just like that, you’re done storing away your weed-eater for the season.


Solutions for Storing

There are a variety of ways to keep your weed eater organized, but the most typical are either hooks, shelves, or brackets.

Hooks and Brackets

You may purchase brackets from Amazon that will do the job. Make sure you have enough room in your garage or shed, and hang the bracket high enough so it doesn’t get in the way and is out of children’s reach. If you’re looking to hang your weed-eater, these storage hooks are a fantastic option.


Rack of Shelves

The other option is shelving, which you can either buy and set up yourself, or you may create your own. To make it yourself, all you need is a piece of plywood, a tape measure, and a saw to carve indents for your weed-eater and other garden tools to be hung from. It’s a lot of fun to build your own racking, and the greatest part is that you can generate as much storage space as you need without having to spend money on pre-made shelves!

Was this helpful?

Yes
No
Thanks for your feedback!

Leave a Comment