Why Is My Pressure Washer Not Starting? Superb 4 Reasons Behind It

Did you recently purchase a pressure washer and have the motor turn on but not run? So why is my pressure washer not starting? This may be caused by one of three common issues. If your unit is equipped with a fuel pump, check that it has gas in it. If not, fill the tank with gas and then try starting the unit again.  In this blog, we also have an article about simpson pressure washer that you might want to read about it.

Pressure washing has quickly become one of the preferred methods of cleaning a variety of surfaces in both residential, commercial, and business locations.”

windowgenie.com

Why Is My Pressure Washer Not Starting?

Capacitor

Conduct a visual inspection of the spark plug for evidence of wear or damage. Replace the spark plug if the porcelain insulator is fractured, an electrode is burnt away or damaged, or there is significant carbon accumulation at the electrode. Utilize a spark plug tester to discover whether the spark plug is faulty. When the engine starts cranking, you should witness a bright spark between the tester’s terminals. If there is no spark, the spark plug is faulty and should be changed.


Carburetor

It is possible that the carburetor is clogged. The most typical cause of a blocked carburetor is keeping gasoline in the pressure washer for an extended length of time. Certain components of the gasoline may evaporate with time, leaving behind a thicker, stickier material. This viscous gasoline might block the carburetor and render the engine inoperable. Clean the carburetor if it is blocked using carburetor cleaner. If cleaning the carburetor does not work, rebuild or replace the carburetor entirely.


 Ignition Coil

While the engine is operating, the ignition coil supplies electricity to the spark plug. The engine may not start if the ignition coil is faulty. Before replacing the ignition coil, inspect the spark plug for appropriate operation. After confirming that the spark plug is operating correctly, use an ignition coil tester to check the ignition coil. Replace the ignition coil if it is faulty.


Flywheel Key

Perhaps the flywheel key sheared in half. The flywheel key is a tiny metal item that is inserted into the crankshaft and engages the flywheel. If the engine comes to a rapid halt as a result of the pressure washer colliding with a hard object, the flywheel key splits in two to protect the engine. Remove the flywheel from the engine and check the flywheel key to discover whether it is broken. Replace the flywheel key if it is broken.


How Do I Clean A Pressure Washer Tank?

The most likely cause of a pressure washer not starting is something simple like having less than 20% of the gas left in the tank. To see whether this is the issue, pull off the top portion of the spout and look at the amount of fluid there. If the tank looks empty, it could mean that the pump is running low. To test this, connect the power supply back to the pump. If the pump turns on without spraying any fluid, you know you’ve got a problem. Try refilling the tank before attempting to start the pressure washer again.

Pressure washers are extremely useful tools that make cleaning tough stains fast and easy. It’s a handy weapon to have in your arsenal against dirt and grime.”

Eric, author from readytodiy.com

Benefits from pressure washer

Pressure washing is a simple process that anybody can do

Typical cleaning procedures demand a great deal of time, energy, and elbow grease. There is no need to scrape and effort to dislodge tough trash with pressure washing. Avoid straining your back and joints. Pressure washers enable you to keep a solid upright stance while directing the water’s power toward undesirable spots. Pressure washing treatments are also extremely easy to set up, requiring approximately as many steps as it takes to locate soap, sponges, and fill a bucket. To begin, just connect a water line to the pressure washer unit and plug it in or add fuel to the power source.


Pressure washing is a significant time saver

In comparison to conventional cleaning procedures, pressure washing is a bacteria-killing blitzkrieg. When you hire a professional pressure washer, you eliminate the need to collect supplies, make an adequate cleaning solution, and scrub for a half-day or more. Pressure washing avoids the need for time-consuming ladder labor by simply directing the nozzle toward difficult-to-reach locations.


Pressure washing ensures the safety of your family

Your home contains more than just family members. On decks, outside walls, and walkways, a variety of pollutants exist, ranging in severity from dirt to dangerous mold. Pressure washing effectively removes these potentially dangerous chemicals, ensuring that your family breathes the cleanest air possible.

Additionally, pressure washing algae or other slippery material away reduces your family’s chance of falling or slipping at home. Additionally, regular pressure washing treatments are considered part of a comprehensive preventive maintenance program that may help keep your house safe and in good condition. Maintaining a clean house helps prevent early degradation of your porch, driveway, or deck, which improves safety results.

Was this helpful?

Yes
No
Thanks for your feedback!

Leave a Comment