How to use pole pruner? Trees are wonderful, but they can become a problem when they grow too high. Pole pruners are one of the most common tools used in landscaping and gardening. They are used to cut back trees and shrubs that may be growing too close to structures.

Pole pruners are also used in the maintenance of trees and shrubs on property. So if you want to know how to use pole pruner, read this article until end to know more about it. In this blog, we also have an article about best pruners on amazon 2022 that you might want to read about it.

IN THIS ARTICLE:

How To Use Pole Pruner

There is nothing to say on the subject: utilizing the tool will come easily to you. Rather than a step-by-step approach, keep the following points in mind:

If you’re cutting a branch, stand to one side rather than right underneath it. When cutting little wood, it is OK to be underneath it, but avoid looking up during the cut. Alternatively, use safety eyewear. That is never a negative thing to do.
Protect your hands from rope burn by using work gloves. Even inexpensive cotton gloves may make a significant impact.
Before cutting, wrap the rope once around your hand and then clinch your fist around it. You may now get a powerful pull without squeezing your hand to keep the rope taut.
Avoid cutting anything too big (more than 1/2-inch thick). At times, you may be tempted to do so, but it will not work, and embedding the blade in thick wood is not enjoyable. It’s difficult to remove, and you’ve now left a gash in live wood.
Cut like you would with hand pruners, but avoid going insane attempting to cut perfectly at each node; it’s just too difficult. Insert the twig deeply into the crook of the pole pruner head, which is where the cutting action occurs, and then draw the rope to complete the cut.

What To Consider Before Choosing Pole Pruner

When deciding what type of pole pruner to purchase, there are many things to consider. Here are some considerations before choosing pole pruner:

Consider the size of the tree or plant being trimmed. A larger tree needs a longer pole pruner, while a smaller tree may benefit from a shorter one. The length should be long enough to reach all parts of the tree, but short enough to prevent overburdening the pole.
The height of the tree. Some people have trouble operating pole pruners above their heads. If this happens, an extension pole may be required.
The width of the trunk of the tree. This has a direct effect on how much force is needed for the pruning. The wider the trunk, the greater the amount of force that is required to make an effective cut.
The diameter of the trunk. This is important because it affects how far the pruner can penetrate the wood. A thicker trunk requires a deeper penetration and therefore more effort. The diameter of the trunk also affects the shape of the cut. For instance, a large, wide trunk makes a round cut, while a small, thin trunk creates a jagged cut.

How To Maintain Pole Pruner

Maintaining your pole pruner is a must. The best way to ensure your pole pruner is in good condition is to sharpen the blades. Here are some guides to maintain pole pruner:

Remove the blades when they are dulled. Use a sharpening stone if possible. Otherwise, use fine sandpaper wrapped around a block of wood. Sanding paper works well as it doesn’t scratch the surface of the metal.
Clean the blades after every use. Rubbing alcohol or mineral spirits will clean them quickly.
Use a new rope when necessary. After every few uses, change the rope used to hold onto the pole pruner. Old ropes will degrade over time and become frayed.
You may want to invest in an oil bath. Oil bathes help protect the blade from rust and corrosion. They are easy to install, and require no maintenance whatsoever.