How to maintain pruning shears? Pruning shears are a gardener’s best friend. They make quick work of trimming shrubs and hedges, but their blades can become dull with use. So want to know how to maintain pruning shears? Read this article until the end to know more about how to maintain pruning shears. In this blog, we also have an article about best komok cordless electric pruning shears that you might want to read about it.

IN THIS ARTICLE:

What Is A Pruning Shear

A pruning shear is a tool used to cut off branches and twigs of plants. It can be used on hedges, shrubs, and trees. The shears come in various sizes and shapes, and they can be used either by hand or with a power tool. A pruning shear can be purchased for a few bucks or for a little over a hundred respectively.

The high quality ones are heavy duty, and they can be used for a long time without any problems. Cheaper ones will get you what you pay for; they will either break after a few uses or they will be harder to use. A one for professional use, for it to be good, should be manufactured with stainless steel or another equally as durable material. The blades should be made from the same material so that you can be sure that it will not do any damage to the walls.

Why Choosing A Pruning Shear

A pruning shear is a tool that is used to cut through the stems of plants that are too thick for a garden clipper. They are usually made of metal and have a sharp blade on one side. They are able to cut through thicker stems than a garden clipper, so they are often used for removing plants that have thick or hard stems.

Pruning shears help to keep a garden healthy, as they can be used to cut back overgrown plants and are also commonly used to trim the plants between growing seasons. There are various features, both practical and aesthetic, that should be considered when purchasing pruning shears.

How To Maintain Pruning Shears

If you want to keep your pruning shears sharp and in good condition, then you need to know how to properly maintain them. Here are the way to maintain pruning shears to keep in shape:

Pruning tools that have been well-maintained will provide a cleaner cut, lowering the danger of transmitting plant diseases and making pruning physically easier. Begin by ensuring that your pruning tools are clean. If required, use a wire brush or wire wool to remove any entrenched dirt or sap. They should be washed with soapy water and dried.
Pruners, loppers, and shears are all sharpened in a same manner. Hold the tool securely in place, then run the sharpener down the blade’s edge. Use the right file, whetstone, or sharpening stone for the size of the blade. Sharpen just the cutting blade, moving the stone in the same direction as the bevel. Smaller blades may need a circular motion to be operated. Sharpening should take between two and five passes with the file or stone.
Tighten any loose nuts on moving components now. This is also an excellent opportunity to order any necessary replacement components, such as new blades, springs, or handles for a hardworking set of pruners.
Finish with a tool lubricating spray. Don’t forget to use lubricant throughout the year, especially after intense pruning.
Take care of your tools, and they will serve you well. What are your recommendations for maintaining your tools? Tell us in the comments section below.