How to add cleaner to pressure washer? Keeping your home clean is never an easy task. You have to spend a lot of time and effort just to keep it clean. But not every cleaning product is good for you and the environment. So, you should consider buying pressure washer to give your home a deep clean. In this blog, we also have an article about simpson pressure washer aluminum brand that you might want to read about it.
Pressure washing or power washing is the use of high-pressure water spray to remove loose paint, mold, grime, dust, mud, chewing gum and dirt from surfaces and objects such as buildings, vehicles and concrete surfaces.
Wikipedia.org
What is pressure washer?
A pressure washer is a powerful machine that uses high-pressure water to clean the surface of surfaces. The unit consists of an electric motor and two hoses, one for the hot water and one for the cold water. It works by applying pressure at high speeds in a short amount of time, which breaks up dirt particles. Pressure washers are used to remove dirt from different surfaces including concrete, decks, driveways, siding, stone, tile, or wood. They can also be used on hard-to-reach areas like windowsills, roofs, gutters, and downspouts.
A pressure washer is the perfect tool to work magic on concrete or decking, walkways, patios, steps, and more. The best models can erase months or even years of stains with a brief blast.”
consumerreports.org
Type of pressure washer
The first type of pressure washer uses a trigger sprayer with a nozzle attached to it. This allows you to adjust how much cleaning solution is sprayed onto the area being cleaned. A trigger sprayer usually has three settings: off, low, and high. These settings determine the volume of cleaning solution sprayed into the air as well as where the cleaning solution goes when it hits the ground. You may have seen these types of pressure washers at construction sites.
The second type of pressure washer features a wand instead of a trigger sprayer. This wand is connected to the hose that carries the cleaning solution. When you press the button located on this tool, cleaning solution comes out through nozzles on the end of the wand. This allows you to scrub any part of your house, patio, deck, driveway, etc., without needing to touch the dirty areas.
How does pressure wash work?
Pressure washing works by creating a lot of force within the unit. By using a pressure washer, you’re able to apply pressure to the surface in order to cause small cracks in the surface. As dirt accumulates inside those cracks, the pressure washer continues to break them open until they’re so large that all of the dirt falls out.
This process works best if you use a detergent designed specifically for pressure washing. Otherwise, you could damage the paint or other finishings on your home.
How To Add Cleaner To Pressure Washer
So, how to add cleaner to pressure washer? Knowing how to apply soap to a pressure washer precisely, whether upstream (before the water pump) or downstream (after the water pump), saves time and work, not to mention money if the venture is commercial:
- Choose to install a chemical injector kit upstream (before the water pump) so that soap is fed to the pressure washer and onto whatever is being cleaned under high pressure. Install a downstream chemical injector kit (after the water pump) to add soap to the pressure washer and onto whatever you’re cleaning under low pressure.
- If you haven’t previously, install one of these two kinds of chemical injector kits. Follow the manufacturer’s instructions or, if required, have it professionally installed.
- Connect the siphon tube to the weighted strainer (filter). Connect the opposite end of the siphon tube to the chemical injector’s hose barb.
- Placing the bucket near the pressure washer is a good idea. Protective glasses and gloves should be used.
- Fill the bucket halfway with the cleaning solution and place the weighted strainer inside.
- Connect a water line to the pressure washer’s water inlet valve. Connect the hose’s opposite end to a suitable water source.
- Connect the pressure washer hoses, gun and wand, or lance to the pressure washer.
- Start the pressure washer by turning on the water.
- Allow water to flow throughout the system by depressing the pressure washer cannon trigger. Water pressure forces the cleaning solution up through the siphon tube, combining it with the water running through the pressure washer.
Benefits of pressure washer
A power washer cleans surfaces like nothing else can. It uses powerful jets of water to clean windows, porches, decks, patios, siding, driveways, roofs, and many more surfaces quickly and effortlessly. There are two types of pressure washers available; both are effective at removing dirt but differ in their design and function.