How To Sharpen Riding Lawn Mower Blades
Here’s the step if you don’t know how to sharpen riding lawn mower blades:
Blade sharpening on riding mowers
To begin, secure your bar blade in the vice. This will enable you to concentrate on sharpening the blade uniformly throughout its length. Whatever sharpening tool you choose, try to spend equal time on either end while honing to avoid removing more metal from one than the other. This will assist you in avoiding your blades becoming imbalanced.
Hand-sharpen mower blades
You may now manually sharpen your riding mower blade using a file. If you’re wondering what angle lawn mower blades should be sharpened at, the answer is fairly straightforward. Each blade’s angle may vary somewhat, so just follow the angle of the original edge.
Angle grinder to sharpen mower blades
If you have an angle grinder with a metal abrasive disc on hand, this is a speedier method of sharpening ride on lawn mower blades. Once again, ensure that the angle of the existing edge is followed. Stroke the blade with clean, uniform strokes from the inner to the outer edge.
When using an angle grinder, make quick passes over the mower bar blade and take care that the angle grinder does not get too hot. Friction is generated when the blade is ground, which creates heat. Excessive heat will corrode the metal on the lawnmower blade, causing it to distort or lose its edge.
A riding mower, a ride-on lawnmower, or a tractor lawnmower is a type of lawn mower on which the operator is seated, unlike mowers which are pushed or towed
Wikipedia.org
Is It Possible To Sharpen Blades While Still Riding On The Riding Mower?
Although this is not the optimal method, you may sharpen mower blades while they are still attached to the mower. Keep track of the time you spend filing each blade to ensure you spend equal time on each side. This will assist you in avoiding imbalanced blades that might cause injury to your rider.
However, for the greatest results, you should remove the mower’s blades and sharpen them. Removing the blades requires no more work. Additionally, it makes it far simpler to approach the edges (you can clamp it into a workbench vice, rather than kneeling or laying on the ground)
Removing the lawn mower blades to sharpen them allows for a more steady hand and a more finished job. This means you may clamp it in a vice and concentrate on maintaining a constant angle throughout the length of the blade.
However, the primary purpose to remove your blades during sharpening is to verify their balance after you’re through. You cannot check the balance of your blades until you remove them from the mower.
A blade that is out of balance might really cause harm to your ride-on mower. Next time you mow, listen for any strange sounds coming from underneath your mower deck; you may need to take it in for servicing and have it balanced for you. In this blog, we have an article about best riding lawn mowers on amazon that you might want to read about it.
The best riding lawn mower is a must if you are dealing with a lawn that covers acres rather than feet. And there are plenty to choose from, whether you have one already and want an upgrade, or are struggling to maintain your yard with a push mower.
Brittany Romano, author from homesandgardens.com
Disassembly of riding mower blades
To disassemble the riding mower blades, you’ll need a wooden chock, a 15/16 socket wrench, and a marker. To begin, reach down and use your marker to outline the underside of the blades. This will indicate which side of the lawn mower blade is up, allowing you to replace them appropriately.
A nut secures the lawn mower blades. The difficulty is that when you spin the nut, the blade also rotates. This is where your 24 wood chock comes in helpful. Insert the wood chock into the deck to prevent the blade from turning. Then, using your socket wrench, unscrew the nut.
Do You Need Blade Balancing On Your Mower?
Due to the fact that unbalanced mower blades may result in increased wear and tear on your ride on mower, it is critical to balance your mower blades after sharpening them.
A blade becomes imbalanced when more metal is filed away from one side than the other. When a mower blade spins exceptionally quickly (about 4000RPM), it generates vibration and needless stress on the frame, blade shaft, bearings, spindle, and motor of your rider’s mower. Eventually, this may result in expensive damage.
Thus, How Is A Lawn Mower Blade Balanced?
This is the point at which your nail comes in helpful. Clamp the nail securely in the vise. Holding the blade horizontally, thread it into the center hole and secure it to the nail. When you release go, observe if the object balances or tips to one side. If one end is heavier than the other, that end has too much weight and you’ll need to grind it down more.